Samiha Mourad
October 18, 1999
For your senior design, you may wish to use any or all of the CAD Tools and equipment listed in the table given below. Most of CAD tools have tutorials at the web site indicated.
For supplies such as resistors, capacitors, and ICs, check with Mr. Yohannes Kahsai in Room EC314.
For hours of the Design Center, check at:www.scudc.scu.edu/
In the Fall, EC 318 is open on Mondays, Wednesdays, and Thursdays from 5:30 p.m. to 10:30 p.m. and weekends from 8 am to 8 p.m. These hours to not apply to holidays, Thanksgivings and Christmas.
|
|
|
|
|
| Logic Design | MG Design Architect | Design Center | http://www.scudc.scu.edu/mentortu/index2.html |
| MG QuickSim | http://www.scudc.scu.edu/mentortu/index2.html | ||
| Logic Design | Synopsys VCS | Design Center | Available in December 1999 |
| Using HDL | Synopsys Synthesis Tools | http://www.scudc.scu.edu/mentortu/synopsys_index.html | |
| Circuit Design | MG IC Station | Design Center | http://www.scudc.scu.edu/mentortu/index2.html |
| Simulation | MG Accusim | http://www.scudc.scu.edu/mentortu/index2.html | |
| Spice 3 | http://www.scudc.scu.edu/mentortu/ucb_spice3.html | ||
| Avanti Hspice | http://www.scudc.scu.edu/mentortu/hspice.html | ||
| FPGAs | XILINX | Design Center | |
| Downloading Boards (ELEN 21) | Prof. Wood EC 213 | ||
| Downloading Broads (ELEN122) | Prof. Shang EC 222 | ||
| PLD | AMD Pro | EC 308 | Mr. Kahsai in EC314 |
| Microprocessors | EE Tools (ELEN 120) | EC 318 | ELEN 120 Instructor |
| based | On Computers MP1 through MP6 | Check with Mr. Kahsai in EC 314 | |
| HP 64000 | EC 318 | Instructor | |
| DSP Tools | TI Processors (ELEN 133) | EC 318 | Prof. Ogunfunmi |
| On Computers DSP 1 through 4 | Check with Mr. Kahsai, EC 314 | ||
| Matlab on all computers |
You can find this information on http://www.engr.scu.edu/mourad/dsl.htm